Lone Wolf Harp Shield Pedal
Audio signals from the amplifier’s speaker are picked up by the microphone and fed back into the amplifier where it is amplified again resulting in what we know as feedback; he Harp Shield will prevent this process from ever starting by using noise gate technology.
Audio signals from the amplifier’s speaker are picked up by the microphone and fed back into the amplifier where it is amplified again resulting in what we know as feedback; the Harp Shield will prevent this process from ever starting by using noise gate technology. The Harp Shield is designed to mute the microphone when you are not playing by decoupling the microphone from the amplifier, thus preventing feedback. With the Harp Shield your microphone is muted when not playing and as you begin to play, the Harp Shield will unmute and allow your signal to pass through to the amp; when you stop playing, the pedal automatically mutes the microphone to prevent feedback. The pedal has a sensitivity control to prevent background noises from opening the audio path and inducing feedback. In the event that feedback does occur, just press the footswitch (a momentary switch) to reset the pedal and stop the feedback. When using this pedal, it is still necessary to use proper microphone handling techniques to help prevent feedback while playing. The Harp Shield differs from guitar noise gates in that the gate range is set for microphone levels and the fact that you will not lose any tone.
The Harp Shield operates off of a 9v battery or a 9vdc power adapter. To make it all just a little easier Lone Wolf is offering a power supply for US and EURO customers to power your pedal. The ac adapter requirements are 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center and the outer positive. The battery is switched off when an external power supply is used and the unit is always powered whenever the mic is plugged in. Power adapter is sold seperately.
1. Sensitivity control
2. Feedback killing footswitch
3. 9vdc Input (barrel with negative center)
4. High Impedance buffered Input
5. Pedal ON/OFF LED
6. Reverse voltage polarity protection
7. 9v battery operation
8. 5 Year warranty on parts and labor
9. If not satisfied return within 60 days undamaged for refund, less 4% cc fee and shipping
Bruno B. pubblicato il 26/12/2019 in seguito ad un ordine del 17/12/2019
Non riesce conpletamente a rimuovere il rumore Dell 'ampli le aspettative erano decisamente migliori.
William P. pubblicato il 10/03/2019 in seguito ad un ordine del 05/03/2019
Gonzalo E. pubblicato il 23/11/2018 in seguito ad un ordine del 22/10/2018
Daniel V. pubblicato il 23/07/2017 in seguito ad un ordine del 08/07/2017
Excellent pedal for harps
I clienti che hanno acquistato questo prodotto hanno comprato anche:
15 altri prodotti della stessa categoria:
- Solo online