Lone Wolf Harp Shield Pedal

169,90 €

Tasse incluse Consegna in 1 - 2 Giorni lavorativi

Audio signals from the amplifier’s speaker are picked up by the microphone and fed back into the amplifier where it is amplified again resulting in what we know as feedback; he Harp Shield will prevent this process from ever starting by using noise gate technology.

Quantità

Disponibile

17 recensioni

Vedi le recensioni

Security policy

Delivery policy

Return policy

ABOUT
Audio signals from the amplifier’s speaker are picked up by the microphone and fed back into the amplifier where it is amplified again resulting in what we know as feedback; the Harp Shield will prevent this process from ever starting by using noise gate technology. The Harp Shield is designed to mute the microphone when you are not playing by decoupling the microphone from the amplifier, thus preventing feedback. With the Harp Shield your microphone is muted when not playing and as you begin to play, the Harp Shield will unmute and allow your signal to pass through to the amp; when you stop playing, the pedal automatically mutes the microphone to prevent feedback. The pedal has a sensitivity control to prevent background noises from opening the audio path and inducing feedback. In the event that feedback does occur, just press the footswitch (a momentary switch) to reset the pedal and stop the feedback. When using this pedal, it is still necessary to use proper microphone handling techniques to help prevent feedback while playing. The Harp Shield differs from guitar noise gates in that the gate range is set for microphone levels and the fact that you will not lose any tone.

POWER
The Harp Shield operates off of a 9v battery or a 9vdc power adapter. To make it all just a little easier Lone Wolf is offering a power supply for US and EURO customers to power your pedal. The ac adapter requirements are 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center and the outer positive. The battery is switched off when an external power supply is used and the unit is always powered whenever the mic is plugged in. Power adapter is sold seperately.

FEATURES
1. Sensitivity control
2. Feedback killing footswitch
3. 9vdc Input (barrel with negative center)
4. High Impedance buffered Input
5. Pedal ON/OFF LED
6. Reverse voltage polarity protection
7. 9v battery operation
8. 5 Year warranty on parts and labor
9. If not satisfied return within 60 days undamaged for refund, less 4% cc fee and shipping

In magazzino 4 Articoli

Visualizza il certificato di fiducia

Recensioni sottoposte a verifica

Per ulteriori informazioni sulla natura della verifica delle recensioni e sulla possibilità di contattare l'autore dell'opinione, consulta le nostre CGU.
Non è stato fornito nessun incentivo per queste recensioni
Le recensioni sono pubblicate e mantenute per un periodo di 5 anni
Le recensioni non possono essere modificate; se un cliente vuole modificare la sua recensione, deve contattare direttamente Recensioni Verificate, per far cancellare la precedente e scriverne una nuova
I motivi della cancellazione di una recensione sono disponibili qui.

4.8 /5

Basato su 17 recensioni cliente

1

0
2

0
3

1
4

2
5

14

Ordina recensioni per :

Gianpaolo A. pubblicato il 26/03/2023 in seguito ad un ordine del 22/03/2023

5/5

funzionale risolve