Lone Wolf Terminator Pedal
  • Lone Wolf Terminator Pedal

Lone Wolf Terminator Pedal

€94.90
Tax included Delivery in 1 - 2 working Days

The Lone Wolf Terminator is the answer for those who want to get the most out of their high impedance microphone and for those who desire a splitter with isolated outputs. This pedal is great for gigging musicians and the studio.

Quantity
Available

 

Security policy

 

Delivery policy

 

Return policy

ABOUT
The Lone Wolf Terminator is the answer for those who want to get the most out of their high impedance microphone and for those who desire a splitter with isolated outputs. This pedal is great for gigging musicians and the studio.

The Terminator is an active FET buffer and isolated splitter with a 10 meg ohm input. The 10 meg impedance is ideal for crystal microphone elements and more than adequate for controlled magnetic elements; in other words, it is perfect for your bullet microphone. Your tone will be fatter and you may find that microphones that have been put away now sound great. Good effect pedals will have a true bypass and with a true bypass you will lose the impedance match that the pedal provides causing the tone to be a little thinner, just like playing with no effect pedals at all, the Terminator will prevent this tone loss while in bypass by always providing an optimum impedance match for your microphone. The splitter function allows you to play through two amps at once or go to a PA with the second output, this feature allows for a lot of creativity and a stereo sound while performing. You can have effects with one amp while the other amp is clean, different effects with each amp or anything else you can dream up.

There is no gain in the pedal and there is no distortion. One output can be used to feed an amplifier and the second can feed either another amplifier or the LINE (or instrument) input on a PA. While the typical guitar amplifier has only a 68k ohm input impedance and the typical boutique harp amp may have a 1 meg ohm input impedance. When you use the Terminator you will have the optimum input impedance for a high impedance bullet microphone.

POWER
The pedal can be powered with a 9V battery or a DC adapter. The DC adapter requirements are a regulated 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center. The battery is switched OFF when an external power adapter is used, and the "IN" jack acts as the pedal ON/OFF switch. Power adapters for US and EURO customers are sold separately.


FEATURES

  1. 10 MEG OHM Input Impedance
  2. 2 Isolated Amplifier Outputs
  3. 9V DC input (barrel with a negative center)
  4. LED ON/OFF Indicator
  5. Reverse polarity protection
  6. 5-year warranty on parts and labor



2 Items
View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

5 /5

Based on 2 customer reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    0
  • 5
    2
Sort reviews by :

Boris G. published the 29/11/2016 following an order made on 15/11/2016

5/5

the terminator workshop as it should

Did you find this helpful? Yes 0 No 0

PICARD A. published the 26/09/2015 following an order made on 13/09/2015

5/5

-Quattro Lone Wolf pedala adattatore da 9V, bella e buona qualità.

Did you find this helpful? Yes 0 No 0

×