Lone Wolf Harp Shield Pedal
Audio signals from the amplifier’s speaker are picked up by the microphone and fed back into the amplifier where it is amplified again resulting in what we know as feedback; the Harp Shield will prevent this process from ever starting by using noise gate technology. The Harp Shield is designed to mute the microphone when you are not playing by decoupling the microphone from the amplifier, thus preventing feedback. With the Harp Shield your microphone is muted when not playing and as you begin to play, the Harp Shield will unmute and allow your signal to pass through to the amp; when you stop playing, the pedal automatically mutes the microphone to prevent feedback. The pedal has a sensitivity control to prevent background noises from opening the audio path and inducing feedback. In the event that feedback does occur, just press the footswitch (a momentary switch) to reset the pedal and stop the feedback. When using this pedal, it is still necessary to use proper microphone handling techniques to help prevent feedback while playing. The Harp Shield differs from guitar noise gates in that the gate range is set for microphone levels and the fact that you will not lose any tone.
The Harp Shield operates off of a 9v battery or a 9vdc power adapter. To make it all just a little easier Lone Wolf is offering a power supply for US and EURO customers to power your pedal. The ac adapter requirements are 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center and the outer positive. The battery is switched off when an external power supply is used and the unit is always powered whenever the mic is plugged in. Power adapter is sold seperately.
1. Sensitivity control
2. Feedback killing footswitch
3. 9vdc Input (barrel with negative center)
4. High Impedance buffered Input
5. Pedal ON/OFF LED
6. Reverse voltage polarity protection
7. 9v battery operation
8. 5 Year warranty on parts and labor
9. If not satisfied return within 60 days undamaged for refund, less 4% cc fee and shipping
Andrea C. published the 28/05/2021 following an order made on 16/04/2021
Molto utile per evitare fischi e disturbi, ottimo da utilizzare con amplificatore ad alto volume e nelle situazioni in cui l'emissione di fiato non è mai quasi nulla. Nelle situazioni più ridotte (in cui i volumi sono più bassi e, dunque, è improbabile che ci siano fischi) è meglio non usarlo perchè taglia un pò il suono quando si soffia o a aspira piano. Svolge comunque benissimo il suo compito.
Anonymous A. published the 26/12/2019 following an order made on 17/12/2019
Non riesce conpletamente a rimuovere il rumore Dell 'ampli le aspettative erano decisamente migliori.
Anonymous A. published the 10/03/2019 following an order made on 05/03/2019
Anonymous A. published the 23/11/2018 following an order made on 22/10/2018
Customers who bought this product also bought:
16 other products in the same category:
- Online only