Produttori

Cerca

Lone Wolf Terminator Pedal

Lone Wolf Terminator Pedal

The Lone Wolf Terminator is the answer for those who want to get the most out of their high impedance microphone and for those who desire a splitter with isolated outputs. This pedal is great for gigging musicians and the studio.

Altri dettagli


EUR89.00 IVA compresa

2   recensioni prodotto

ABOUT
The Lone Wolf Terminator is the answer for those who want to get the most out of their high impedance microphone and for those who desire a splitter with isolated outputs. This pedal is great for gigging musicians and the studio.

The Terminator is an active FET buffer and isolated splitter with a 10 meg ohm input. The 10 meg impedance is ideal for crystal microphone elements and more than adequate for controlled magnetic elements; in other words, it is perfect for your bullet microphone. Your tone will be fatter and you may find that microphones that have been put away now sound great. Good effect pedals will have a true bypass and with a true bypass you will lose the impedance match that the pedal provides causing the tone to be a little thinner, just like playing with no effect pedals at all, the Terminator will prevent this tone loss while in bypass by always providing an optimum impedance match for your microphone. The splitter function allows you to play through two amps at once or go to a PA with the second output, this feature allows for a lot of creativity and a stereo sound while performing. You can have effects with one amp while the other amp is clean, different effects with each amp or anything else you can dream up.

There is no gain in the pedal and there is no distortion. One output can be used to feed an amplifier and the second can feed either another amplifier or the LINE (or instrument) input on a PA. While the typical guitar amplifier has only a 68k ohm input impedance and the typical boutique harp amp may have a 1 meg ohm input impedance. When you use the Terminator you will have the optimum input impedance for a high impedance bullet microphone.

POWER
The pedal can be powered with a 9V battery or a DC adapter. The DC adapter requirements are a regulated 9V DC with a minimum 100mA output and a 2.1mm x 5.5mm connector with a negative center. The battery is switched OFF when an external power adapter is used, and the "IN" jack acts as the pedal ON/OFF switch. Power adapters for US and EURO customers are sold separately.


FEATURES

  1. 10 MEG OHM Input Impedance
  2. 2 Isolated Amplifier Outputs
  3. 9V DC input (barrel with a negative center)
  4. LED ON/OFF Indicator
  5. Reverse polarity protection
  6. 5-year warranty on parts and labor



Valutazione prodotti
  • Numero di recensioni : 2
  • Voto medio : 5 /5
  • G. Boris
  •  il 29/11/2016
  • 5/5
the terminator workshop as it should
  • A. PICARD
  •  il 26/09/2015
  • 5/5
-Quattro Lone Wolf pedala adattatore da 9V, bella e buona qualità.

Nessun commento da parte dei clienti in questo momento.

Solo gli utenti registrati possono lasciare un nuovo commento.

Carrello  

Nessun prodotto

Spedizione EUR0.00
Totale EUR0.00

Carrello Acquista

Ultime dal Forum

PayPal

Cerca

Prodotto : Lone Wolf Terminator Pedal - The Lone Wolf Terminator is the answer for those who want to get the...
Prezzo : 89€
Valutazione di Lone Wolf Terminator Pedal : 5/5 su 2 recensioni

I cookie aiutano Harp Elite a fornire i propri servizi ed una migliore esperienza. Navigando sul sito accetti il loro utilizzo. 

Ok